Product Information
Main milling component
Model | Purpose | Dimension of Roll | Pitch of Roll |
---|---|---|---|
Type B | Wheat |
178φ x 254mm (7" x 10") |
13 teeth/inch |
Type BR | Others | 18 teeth/inch |
Product Information
Select from the configurations below according to the application and installation location.
Model | Purpose | Dimension of Roll | Pitch of Roll |
---|---|---|---|
Type B | Wheat |
178φ x 254mm (7" x 10") |
13 teeth/inch |
Type BR | Others | 18 teeth/inch |
Standard type | Steel Height = 3910mm |
|
---|---|---|
Shortened type | Steel Height = 3500mm |
The elevating machine and the tank are connected by a screw conveyor. |
For 1 bale (Weight: 60kg) |
Combinations with shortened elevating machines are possible depending on the ceiling height. |
---|---|
For 2 bales (Weight: 120kg) |
The elevating machine and the tank are connected by a screw conveyor. Shortened elevating machines can not be incorporated in the configuration. |
Model | Purpose | Specification |
---|---|---|
Type B | Wheat | Oscillating model, 2-stage configuration for 3 grain types |
Type BR | Buckwheat | Oscillating model, 2-stage configuration for 3 grain types, with intermediate discharge mechanism |
Rice and others | Oscillating model, 2-stage configuration for 3 grain types | |
Unmixed buckwheat flour | Oscillating model, 1-stage configuration for 2 grain types |
Silk | Mesh/inch | Mesh/sun (3.03cm) |
Aperture (μm) |
---|---|---|---|
NP26 | 70 | 83 | 236 |
32 | 86 | 102 | 183 |
38 | 102 | 122 | 150 |
40 | 107 | 128 | 142 |
45 | 121 | 144 | 118 |
52 | 139 | 166 | 99 |
58 | 156 | 186 | 90 |
Nylon | Mesh/inch | Aperture (μm) |
---|---|---|
NXX 7 | 84.5×91 | 200 |
8 | 90.5×101.5 | 180 |
9 | 108×115 | 150 |
10 | 121×130 | 132 |
11 | 133×141 | 118 |
12 | 137×147 | 112 |
13 | 148×156 | 100 |
14 | 158×172 | 95 |
15 | 165×190 | 85 |
NMG 10 | 9.5 | 2,000 |
12 | 11.0 | 1,800 |
14 | 12.0 | 1,600 |
15 | 14.0 | 1,400 |
17 | 15.0 | 1,250 |
19 | 16.5 | 1,120 |
20 | 19.0 | 1,000 |
23 | 20.5 | 900 |
24 | 21.0 | 850 |
26 | 23.5 | 800 |
Nylon | Mesh/inch | Aperture (μm) |
---|---|---|
NMG 27 | 24.5 | 750 |
28 | 25.5 | 710 |
30 | 27.5 | 670 |
31 | 29.0 | 630 |
32 | 30.0 | 600 |
34 | 31.5 | 560 |
36 | 34.0 | 530 |
38 | 35.5 | 500 |
40 | 36.5 | 475 |
42 | 38.5 | 450 |
44 | 40.5 | 425 |
45 | 42.5 | 400 |
46 | 44.5 | 390 |
47 | 44.0 | 375 |
48 | 47.0 | 363 |
50 | 49.0 | 355 |
52 | 50.5 | 335 |
54 | 53.0 | 315 |
56 | 53.5 | 308 |
58 | 56.5 | 300 |
60 | 59.0 | 280 |
62 | 59.5 | 275 |
64 | 61.0 | 265 |
66 | 67.5 | 250 |
68 | 68.5 | 243 |
70 | 70.0 | 236 |
72 | 74.0 | 224 |
84 | 79.5 | 200 |